CD9088CB Datasheet PDF – Electric Tuning FM Radio IC

Part Number: CD9088CB

Function: Monolithic Power FM radio Tuner Circuit

Package: SOP 16 Pin

Manufacturer: Wuxi China Resources Silicon Microelectronics

Image :

CD9088CB Image

 

Description

The CD9088CB is a monolithic power FM radio tuning circuit, the external circuit is simple, low-cost applications, phase-locked loop circuit built-in frequent rate of 70kHz Department. EC selectivity achieved by active RC filter, mute circuit inhibit non-IF signal and the IF signal is too weak. The IC is a bipolar integrated circuit for use in mono portable and pocket radios.

Features

1. Equipped with all stages of a mono receiver from antenna to audio output
2 Mute circuit
3. Search tuning with a single varicap diode
4. Mechanical tuning with integrating AFC
5. AM application supported
6. Power supply polarity protection

Pinout

CD9088CB pinout

Applications

1. Mechanical tuning; this is possible with or without integrating AFC circuit
2. Electrical tuning; this is realized by one directional (band-up) search tuning facility, including RESET to the lower-band limit

Block Diagram

CD9088CB Datasheet

Other data sheets are available within the file: CD9088

CD9088CB Datasheet PDF Download

CD9088CB pdf

 


 

Similar features and reference parts


 

Posts related to ‘ FM Tuner ‘

Part number Description
CD9088CB 1-Chip FM Electrical Tuner IC
TDA7421 AM/FM Tuner for Car Radio
UTC7607 UTC7607 – FM IF / AM Tuner System
CD9088 1-Chip FM Electrical Tuner IC
RDA5807FP Broadcast FM Stereo Radio Tuner – RDA
TA2111N 3 V AM/FM 1 Chip Tuner IC – Toshiba
RDA5807M RDA5807M – SINGLE-CHIP BROADCAST FM RADIO TUNER
RDA5807MRRD-102V2.0 RDA5807MRRD-102V2.0 – SINGLE-CHIP BROADCAST FM RADIO TUNER
TDA7421N AM/FM Tuner for Car Radio – ST

 

ICL3221 Datasheet PDF – RS-232 Transmitter / Receiver

Part Number: ICL3221

Function: 1 Microamp Supply-Current, +3V to +5.5V, 250kbps, RS-232 Transmitter/Receiver

Pacakge : SSOP 16 Pin Type

Manufacturer: Renesas, Intersil

Pinouts:

ICL3221 datasheet

 

Description

The Intersil ICL3221 devices are 3.0V to 5.5V powered RS-232 transmitters/receivers which meet ElA/TIA-232 and V.28/V.24 specifications, even at VCC= 3.0V. Targeted applications are PDAs, Palmtops, and notebook and laptop computers where the low operational, and even lower standby, power consumption is critical. Efficient on-chip charge pumps, coupled with manual and automatic powerdown functions (except for the ICL3232), reduce the standby supply current to a 1µA trickle. Small footprint packaging, and the use of small, low value capacitors ensure board space savings as well. Data rates greater than 250kbps are guaranteed at worst case load conditions. This family is fully compatible with3.3V only systems, mixed 3.3V and 5.0V systems, and 5.0V only systems.

Features

• 15kV ESD protected (Human Body Model)

• Low-power, pin compatible upgrade for 5V MAX221

• Low-power, pin compatible upgrade for 5V MAX242, and SP312A

• Low-power upgrade for HIN232/ICL232 and pin compatible competitor devices

• RS-232 compatible with VCC = 2.7V

• Meets EIA/TIA-232 and V.28/V.24 specifications at 3V

Other data sheets are available within the file:

ICL3221CA, ICL3221CAZ, ICL3221CV, ICL3221CVZ

 

ICL3221 Datasheet PDF Download


ICL3221 pdf