IT8502 PDF Datasheet – Notebook Embedded Controller – ITE

Part Number: IT8502/N

Function: Notebook Embedded Controller

Package: LQFP, QFP 128 pin

Manufacturer: ITE ( www.ite.com.tw )

Images:

1 page
IT8502 pdf datasheet

Description

The IT8502 is a highly integrated embedded controller with system functions suitable for mobile system applications. The IT8502 directly interfaces to the LPC bus and provides ACPI embedded controller function, keyboard controller (KBC) and matrix scan, external flash interface for system BIOS and EC code, PWM and ADC for hardware monitor, PS/2 interface for external keyboard/mouse devices, BRAM and system wake up functions for system power management. It also supports the external flash (or EPROM) to be shared by the host and EC side.

Features

1. 8032 Embedded Controller

(1) Twin Turbo version/3-stage pipeline

(2) 9.2 MHz for EC domain and 8032 internal timer

(3) Variable frequency range to gain the maximum 8032 code-fetch performance

(4) Instruction set compatible with standard 8051/2

• Ext. 32768
• 4K SRAM
• Up to 16MB Serial Flash
• 12 ADC Channels, 10-bit
• 6 DAC Channels, 8-bit
• 8 PWM Channels
• 8502 No CIR; 8512 2 MCE CIR Ports
• SPI Flash Read Protection
• SPI Flash Write Protection
• PM3 I/O Channel (62/66, 68/6C, 6A/6E)
• Ext. WDT Can Stop After Starting
• Battery-backed 192Byte SRAM
• 73 + 9 GPIO
• UART Port x1
• SPI Device I/F x1, with a BUSY
• 4 SM Bus Masters
• A SMB Slave On Any Channel
• Signal Buffers
• 32768Hz Clock Out
• Timer x5
• PECI 2.0 Host
• TMR […]

 

Other data sheets are available within the file: IT8502E, IT8502F, IT8502G

IT8502 PDF Datasheet

Posts related to ‘ Embedded Controller ‘

Part number Description
IT8512E Embedded Controller, IT8512 – ITE
RTD2120 8051 Embedded Micro Controller
IT8510E Embedded Controller
MTV512M MTV512M PDF – 8051 Embedded Monitor Controller
IT8985E Embedded Controller – ITE
IT8511E Embedded Controller – ITE
IT8528E IT8528E Datasheet Pinout – Embedded Controller – ITE
IT8987E Highly Integrated Embedded Controller

 

Related articles across the web

LTK8002D PDF Datasheet – Class-AB Audio Amplifier

This post explains for the Audio Amplifier. A Class-AB audio amplifier is a type of electronic amplifier that’s commonly used to amplify audio signals for driving speakers. It’s a compromise between the high efficiency of Class D amplifiers and the low distortion of Class A amplifiers. Class-AB amplifiers are widely employed in various audio applications due to their good balance between power efficiency and sound quality.

The Part Number is LTK8002D.

The function of this IC is Class-AB Audio Amplifier.

The package : SOP 8 Pin Type

Manufacturer: LTKCHIP TECHNOLOGY

Images:

LTK8002D datasheet circuit diagram

Description

This device is a 3W, mono AB audio power amplifier chip. The working voltage is 2V-5V, and the BTL bridge connection mode can provide 4Ω load with a THD less than 10% and an average output power of 3.0W under a 5V power supply voltage. In shutdown mode, the current typical value is less than 0.5uA.

LTK8002D is specially designed to provide high-power, high-fidelity audio output. It only requires a small number of peripheral components and can work under low voltage conditions (2V-5V). LTK8002D does not require coupling capacitors, bootstrap capacitors or buffer networks, so it is very suitable for low-volume, low-power systems.

Class-AB audio amplifiers are commonly used in home audio systems, car audio systems, professional audio equipment, and more. They’re suitable for applications where a good balance between power efficiency and sound quality is desired.

Pinout:

LTK8002D datasheet amplifier

Features:

1. Built-in switch popping suppression circuit

2. 10% THD+N, VDD=5V, under 4Ω load, provide Up to 2.9W output power

3. 10% THD+N, VDD=5V, 8Ω load, provide Up to 1.8W output power

4. Shut-off current <0.5uA

5.  Package mode: SOP-8

6. Overheat protection

Applications:

1. Plug-in speaker

2. Bluetooth speaker

3. Lithium battery amplifier

4. FM player

LTK8002D PDF Datasheet