74HC75 Datasheet PDF – Quad Bistable Transparent Latch

Part Number: 74HC75

Function: Quad bistable transparent latch

Package: DIP, SOP 16 Pin Type

Manufacturer: Philips Electronics ( https://www.nxp.com/ )

Pinouts:

74HC75 datasheet

 

Description

The 74HC75 is a high-speed Si-gate CMOS device and is pin compatible with low power Schottky TTL (LSTTL). The 74HC75 is specified in compliance with JEDEC standard no. 7A.

The device has four bistable latches. The two latches are simultaneously controlled by one of two active HIGH enable inputs (LE12 and LE34). When LEnn is HIGH, the data enters the latches and appears at the nQ outputs. The nQ outputs follow the data inputs (nD) as long as LEnn is HIGH (transparent). The data on the nD inputs one set-up time prior to the HIGH-to-LOW transition of the LEnn will be stored in the latches. The latched outputs remain stable as long as the LEnn is LOW.

A quad bistable transparent latch, also known as a quad D latch, is a digital logic circuit that consists of four individual D latches combined in a single integrated circuit. Each D latch has a data input (D), an enable input (E), and two complementary outputs (Q and Q’).

Features

1. Complementary Q and Q outputs

2. VCC and GND on the center pins

3. Low-power dissipation

4. Complies with JEDEC standard no. 7A

5. ESD protection :

(1) HBM EIA/JESD22-A114-B exceeds 2000 V

(2) MM EIA/JESD22-A115-A exceeds 200 V.

Other data sheets are available within the file: 74HC75D, 74HC75DB, 74HC75N, 74HC75PW, 7475

Related Posts

74HC75 Datasheet PDF Download


74HC75 pdf

48LC16M16A2 PDF – 256Mbit, SDR SDRAM – Micron

This post explains for the memory.

The Part Number is MT48LC16M16A2, Marking is 16M16.

The function of this semiconductor is 256Mbit, SDR SDRAM (4 Meg x 16 x 4 banks).

The package is TSOP 54 Pin, FBGA 54 Pin Type

Manufacturer: Micron Technology

Preview images :48LC16M16A2 pdf sdram

Description

MT48LC16M16A2 is 4 Meg x 16 x 4 banks ( 256Mbit, SDR SDRAM ). SDR SDRAM stands for “Single Data Rate Synchronous Dynamic Random Access Memory.” It is a type of memory technology used in computer systems and electronic devices to store and access data. SDR SDRAM is an older generation of SDRAM and has been largely superseded by newer and faster memory technologies.

The 256Mb SDRAM is a high-speed CMOS, dynamic random-access memory containing 268,435,456 bits. It is internally configured as a quad-bank DRAM with a synchronous interface (all signals are registered on the positive edge of the clock signal, CLK).

Each of the x4’s 67,108,864-bit banks is organized as 8192 rows by 2048 columns by 4 bits. Each of the x8’s 67,108,864-bit banks is organized as 8192 rows by 1024 columns by 8 bits. Each of the x16’s 67,108,864-bit banks is organized as 8192 rows by 512 columns by 16 bits.

Features

• PC100- and PC133-compliant

• Fully synchronous; all signals registered on positive edge of system clock

• Internal, pipelined operation; column address can be changed every clock cycle

• Internal banks for hiding row access/precharge

• Programmable burst lengths: 1, 2, 4, 8, or full page

• Auto precharge, includes concurrent auto precharge and auto refresh modes

• Self refresh mode (not available on AAT devices)

48LC16M16A2 datasheet […]

48LC16M16A2 PDF Datasheet