M42SP-6NK PDF Datasheet – Stepping Motor – Mitsumi

This post explains for the Stepping Motor. A stepping motor, also known as a stepper motor, is a type of electric motor that converts digital pulses into precise mechanical movements. Unlike conventional motors that continuously rotate, stepper motors move in discrete steps or increments. Each step corresponds to a fixed angular rotation, making them well-suited for applications that require precise control over position, speed, and rotation.

The Part Number is M42SP-6NK.

Manufacturer: MITSUMI

Preview images :M42SP-6NK datasheet pinout

Description

M42SP-6NK is Stepping Motor.

1. Step Angle: The step angle is the angle by which the motor rotor moves for each electrical pulse applied to the motor. Stepper motors are available with different step angles, with common values being 1.8 degrees (200 steps per revolution) and 0.9 degrees (400 steps per revolution).

2. Stator and Rotor: A stepping motor consists of a stationary part called the stator and a rotating part called the rotor. The stator contains coils of wire that create magnetic fields when current flows through them, while the rotor contains permanent magnets or teeth to interact with these magnetic fields.

3. Phases and Windings: Stepper motors can have multiple phases, typically two or four. Each phase corresponds to a set of coils wound around the stator. These phases determine the motor’s behavior and the sequence of steps it takes.

4. Control: Stepper motors are controlled by sending sequences of digital pulses to their windings. The sequence and timing of these pulses determine the direction and number of steps the motor takes.

Features

1. High response.

2. High output torque.

3. Superior running quietness and stability.

OUTLINE “M42SP-6NK” has acquired the highest response among the outer diameter 42mm model series-holding torque : 41.2mN·m, pullout torque : 21.6mN·m/800pps, and pull-in torque : 25.5mN·m/200pps (12V DC). With superior running noiselessness and other features, this model motor is the most suited to future, compact electronic equipment.

M42SP-6NK pdf motor

Applications:

1. Printers, typewriters, word processors

2. Facsimiles, copy machines.

M42SP-6NK PDF Datasheet

Related articles across the web

FT2820 PDF Datasheet – 4W, Class-G Audio Power Amplifier

A Class-G audio power amplifier is a type of electronic amplifier designed to efficiently deliver high-quality audio signals to speakers or other audio devices. It combines characteristics of both Class-AB and Class-H amplifiers to improve efficiency and reduce power dissipation, especially when amplifying audio signals with varying levels.

Part Number: FT2820

Function: 4W Dual-Pump Class-G Audio Power Amplifier

Package: TSSOP-20L Type

Manufacturer: Fangtek

Images:FT2820 pdf amplifier

Description

The FT2820 is a 4W boosted Class-G audio power amplifier based upon a proprietary Dual-PumpTM topology with automatic level control (ALC). It operates from 3V to 5.5V supply. When operating with a 4.2V supply voltage, it is capable of driving a 4Ω speaker load at a continuous average output of 4W with 10% THD+N. Its high efficiency, up to 82%, helps extend battery life for portable device applications.

In ft-2820, the power supply rail for the amplifier’s output stage is internally boosted and regulated at 6V by an adaptive charge pump based upon the Dual-PumpTM topology, thus allowing for a much louder audio output than a stand-alone one directly connected to the battery. It makes ft2820 an ideal audio solution for portable devices that are powered by a single-cell lithium battery while requiring higher audio loudness.  […]

FT2820 datasheet pinout

Features

1 Proprietary Dual-PumpTM topology

2. Filterless Class-G operation with an integrated charge pump

3. Automatic level control to eliminate output clipping

4. Integrated lowpass filter for out-of-band noise rejection

5.  Maximum output power : 4W (VDD=4.2V, RL=4Ω, THD+N=10%, ALC Off)

6. Constant output power : 3.3W (VDD=4.2V, RL=4Ω, THD+N=0.5%, ALC On)

7. High power efficiency up to 82%

Applications:

1. Portable Speakers

2. MID

3. Mobile Phones

FT2820 PDF Datasheet