UTC1517 PDF Datasheet – 2 x 6W, Stereo Power Amplifier

Part Number: UTC1517

Function: 2 x 6W, Stereo Power Amplifier

Package: DIP 18 Pin Type

Manufacturer: YOUWANG

Images:UTC1517 pdf amplifier

Description

The UTC1517 is an integrated class-B dual output amplifier in a plastic single in-line medium power package with fin and a plastic heat-dissipating dual in-line package. The device is primarily developed for multi-media applications.

A Class-B dual output amplifier is an electronic amplifier configuration that utilizes two transistors, often one NPN (Negative-Positive-Negative) transistor and one PNP (Positive-Negative-Positive) transistor, to amplify an input signal. This configuration is also known as a push-pull amplifier and is commonly used in audio and radio frequency (RF) applications.

It’s worth noting that while Class-B amplifiers are efficient, they may not be as linear as Class-A amplifiers. To address crossover distortion and improve linearity, Class-AB amplifiers are commonly used in practice. These amplifiers operate in a manner that combines some of the characteristics of Class-A and Class-B amplifiers, offering improved linearity while maintaining relatively high efficiency.

Features

1. Requires very few external components

2. High output power

3. Fixed gain

4. Good ripple rejection

5. Mute/standby switch

6. AC and DC short-circuit safe to ground and VP

7. Thermally protected

8. Reverse polarity safe

9. Capability to handle high energy on outputs (VP = 0 V)

10. No switch-on/switch-off plop

11. Electrostatic discharge protection.  […]

UTC1517 datasheet

SYMBOL PIN DESCRIPTION:

1. -INV1 1 non-inverting input 1

2. SGND 2 signal ground

3. SVRR 3 supply voltage ripple rejection output

4. OUT1 4 output 1

5. PGND 5 power ground

6. OUT2 6 output 2

7. VP 7 supply voltage

8. M/SS 8 mute/standby switch input

9. -INV2 9 non-inverting input 2

UTC1517 PDF Datasheet

Related articles across the web

RKS-11DX-24 PDF – 24VDC, PC Board Miniature Relay

This post describes for the relay.

The Part Number is RKS-11DX-24.

The function of this semiconductor is 2 Form C(DPDT), 24VDC,  PC Board Miniature Relay.

The manufacturer of this part is Siemens.

See the preview image and the PDF file for more information.

RKS-11DX-24 relay datasheet

Description

RKS-11DX-24 is 10 Amp, DC 24V, PC Board Miniature Relay.

A Form C (DPDT) relay refers to a type of relay that has two sets of common (C) terminals and double-pole, double-throw (DPDT) switching contacts. Each set of contacts can be in one of two positions, either connected to the normally closed (NC) terminal or the normally open (NO) terminal.

The “2 Form C” designation means that the relay has two sets of DPDT contacts. This allows the relay to control two separate circuits or devices simultaneously.

The “24VDC” specification indicates that the relay is designed to operate with a 24-volt direct current (DC) power supply. This voltage is typically used in electronic circuits or control systems.

Meets VDE 8mm spacing, 4kV dielectric

Contact Data @ 25°C

1. Arrangements: 1 Form A (SPST-NO), 1 Form B (SPST-NC), 1 Form C
(SPDT), 2 Form A (DPST-NO) and 2 Form C (DPDT).

2. Material: Silver-cadmium oxide.

3. Expected Mechanical Life: 10 million operations.

Features:

• SPST through DPDT contact arrangements.

• Immersion cleanable§, tape sealed plastic case.

• Meets VDE 8mm spacing, 4kV dielectric, coil to contacts.

• Conforms to VDE 0435, 0631, 0700 and 0806.

• UL Class B coil insulation system.

[…]

RKS-11DX-24 pinout pdf

RKS-11DX-24 PDF Datasheet