Pinout

RM5101 PDF Datasheet – 1U Rack Mount, Adjustable Display

Posted on by pinout

This post explains for the 1U Rack, Adjustable Display.

The Part Number is RM5101.

The function of this semiconductor is 1U Rack Mount Adjustable Display.

Manufacturer: ETC

Preview images:RM5101 pdf manual

Description

The RM5101 is a 15″ LCD display that saves rack space. Its unique design allows the user to adjust the angle of tilt from 0 to about 125 degrees.

Specifications:

1. Display Area(mm) : 304.1(H)x228.1(V) (15.0-inch diagonal)

2. Pixel Pitch : 0.297(H) x 0.297(V)

3. Number of Pixels : 1024(H) x 768(V)

4. Contrast Ratio : 500:1(typ.)

5. Display Color : 16.2M(6 bit+FRC)

6. Brightness(cd/m ) : 250(typ.)

7. Input Signal : RGB Analog

8. I/O :

(1) Power : 12V AC adapter(built-in)
(2) VGA : 15-pin D-Sub
(3) Speaker-in (optional)

9. Power Consumption : 25 Watts

10. Power Supply : AC 100-240V Universal

11. On-Screen Display : Contrast, Brightness, H/V Position, H/V Size, H-Scaling

Applications:

1. Server room:

Used for monitoring servers and network equipment.

2. Network operation center:

Monitoring network traffic and system status in real time.

3. Industrial control system:

Used in manufacturing process monitoring and control system.

4. Military and aviation:

Can monitor various data in real time in limited space.

 

RM5101 PDF Datasheet

STP08C596 PDF Datasheet – 8-Bit, Current LED Sink Driver

Posted on by pinout

Part Number: STP08C596

Function: 8-BIT CONSTANT CURRENT LED SINK DRIVER

Package: DIP 16, SO 16, TSSOP 16 Pin Type

Manufacturer: ST Microelectronics

Images:

1 page
STP08C596 pdf datasheet

Description

The device is a monolithic, medium-voltage, low current power 8-bit shift register designed for
LED panel display. The STP08C596 contains a 8-bit serial-in, parallel-out shift register that feeds
a 8-bitD-type storage register. In the output stage, sixteen regulated current sources were designed
to provide 15-120mA constant current to drive the LEDs.

This driver is a device or integrated circuit (IC) used to control and power light-emitting diodes (LEDs) while maintaining a consistent and precise current through them. These drivers are commonly used in LED lighting applications to ensure uniform brightness and extend the life of the LEDs.

Compared with the STPIC6C595, the device provides great flexibility and improved performance in LED panel system design.

 

Features

1. 8 CONSTANT CURRENT OUTPUT CHANNELS

2. ADJUSTABLE OUTPUT CURRENT THROUGH EXTERNAL RESISTOR

3. SERIAL DATA IN/PARALLEL DATA OUT

4. SERIAL OUT CHANGE STATE ON THE FAILING EDGES OF CLOCK

5. OUTPUT CURRENT: 15-120 mA

6. 25 MHz CLOCK FREQ.

2 page
STP08C596 pinout

Pinouts:

1. GND : Ground Terminal

2. SDI : Serial data input terminal

3. CLK : Clock input terminal

4. /LE : Latch input terminal

5-12. OUT 0-7 : Output terminal

13. /OE : Output enable input terminal (active low)

14. SDO : Serial data out terminal

15. R-EXT : Constant Current programming

16. VDD : 5V Supply voltage terminal

Other data sheets are available within the file: STP08C596B1, STP08C596M

STP08C596 PDF Datasheet

Posts related to ‘ Led Drive ‘

Part number Description
ZXLD1360 30V, 1A, LED DRIVER – Diodes
LP5562 Four-channel LED Driver ( PDF )
LM8502 Low-Side LED Driver
FD650 LED Drive Controller – FDHISI
CS6583BO CS6583BO PDF – Constant Current LED Driver
TA7666P TA7666P PDF – Logarithmic Dual LED Driver – Toshiba
BP3122 PSR Constant Current LED Driver – BPS
MAP3201 Current Switch Mode PWM LED Driver
ZLG7290 Interface Keyboard and LED Driver
PMP6017 50W, LED Driver