Part Number: PCM2900C
Function: Stereo Audio Codec with USB Interface, Single-Ended Analog Input/Output, and S/PDIF
Package: SSOP-28 type
Manufacturer: Texas Instruments
Pinouts:
Description
The PCM2900C / PCM2902C are Texas Instruments’single-chip, USB, stereo audio codecs with a USB-compliant full-speed protocol controller and S/PDIF (PCM2902C only). The USB protocol controller requires no software code. The PCM2900C / PCM2902C employ SpAct architecture, TI’s unique system that recovers the audio clock from USB packet data. On-chip analog PLLs with SpAct architecture enable playback and record with low clock jitter as well as independent playback and record sampling rates.
Features
• PCM2900C: Without S/PDIF
• PCM2902C: With S/PDIF
• On-Chip USB Interface :
– With Full-Speed Transceivers
– Fully Compliant with USB 2.0 Specification
– Certified by USB-IF
– Partially Programmable Descriptors
– USB Adaptive Mode for Playback
– USB Asynchronous Mode for Record
– Bus Powered
• 16-Bit Delta-Sigma ADC and DAC
• Sampling Rate:
– DAC: 32 kHz, 44.1 kHz, 48 kHz
– ADC: 8 kHz, 11.025 kHz, 16 kHz, 22.05 kHz,32 kHz, 44.1 kHz, 48 kHz
• On-Chip Clock Generator with Single 12-MHz Clock Source
• Single Power Supply:
– 5 V Typical (VBUS) • Stereo ADC:
– Analog Performance at VBUS = 5 V:
– THD+N = 0.01%
– SNR = 89 dB
– Dynamic Range = 89 dB
– Decimation Digital Filter:
– Passband Ripple = ±0.05 dB
– Stop Band Attenuation = –65 dB
– Single-Ended Voltage Input
– Antialiasing Filter Included
– Digital HPF Included
Other data sheets are available within the file:
PCM2900CDB, PCM2900CDBR, PCM2902C, PCM2902CDB
PCM2900C Datasheet PDF Download
