NJM2096D Datasheet PDF – Dual Power Amplifier

Part Number: NJM2096D

Function: Low Voltage Dual Power Amplifier

Package: DIP 8 Pin Type

Manufacturer: Japan Radio Corporation

Pinouts:

NJM2096D datasheet

Description

The NJM2096D is a dual-channel low-voltage power amplifier IC designed for portable audio applications, capable of operating with a minimum supply voltage of 1.0V in a compact DIP package. It integrates two identical amplifier stages with low quiescent current and minimal external component requirements, making it efficient for battery-powered designs. This device is widely used in headphone amplifiers, portable radios, and small audio output systems.

Features

  • Dual power amplifier with identical channels
  • Low operating voltage down to 1.0V
  • Low operating current for battery efficiency
  • Minimal external component requirement
  • Bipolar technology for stable analog performance
  • Compact package suitable for portable devices

Design Notes

  • Optimized for low-voltage battery-powered audio systems
  • Use proper coupling capacitors to block DC at the output
  • Keep signal traces short to minimize noise pickup
  • Decoupling capacitor on VCC is essential for stable operation
  • Thermal performance is limited due to compact package

How to Choose This Part

  • Select for ultra-low voltage audio amplification needs
  • Ideal for compact, low-power portable devices
  • Suitable when minimal external components are preferred
  • Evaluate output power requirements for speaker driving capability
  • Consider alternatives for higher fidelity or higher output power

Applications

  • Headphone stereo systems
  • Portable radios
  • Portable televisions
  • Handheld audio devices
  • Battery-powered consumer electronics

Alternative / Equivalent Products

  • NJM2076 dual audio power amplifier
  • LM386 low voltage audio amplifier
  • TDA2822 dual audio amplifier
  • KA2206 stereo amplifier IC
  • TEA2025 audio power amplifier

 

NJM2096D Datasheet PDF Download


NJM2096D pdf

Other data sheets are available within the file: NJM2096, NJM2096M, NJM2096S

C1237HA PDF Datasheet – Protector IC – UPC1237 – NEC

C1237HA ( uPC1237HA ) is a monolithic protection IC developed by NEC for stereo audio power amplifiers and loudspeaker protection circuits. The IC helps prevent speaker damage caused by amplifier DC faults and suppresses turn-on/turn-off pop noise by controlling the speaker protection relay.

The package is 8 pin slim SIP Type.

The function of this semiconductor is Monolithic Protector IC.

The manufacturers of this product is NEC.

See the preview image and the PDF file for more information.

Preview images :

1 page
C1237HA pdf pinout

Description

The C1237HA is a monolithic integrated circuit designed for protecting stereo power amplifiers and loudspeakers. In a stereo power amplifier, a protection IC (Integrated Circuit) is often used to safeguard the amplifier and connected speakers from potential damage due to various issues such as short circuits, overheating, over-voltage, and other electrical faults.

1. Overcurrent Protection: This feature detects excessive current flowing through the amplifier circuit and triggers a shutdown or limiting mechanism to prevent damage to the amplifier or connected speakers.

2. Overheat Protection: Overheating can damage amplifier components. A protection IC can monitor the temperature and shut down the amplifier or reduce power output if it reaches a critical level.

3. Short Circuit Protection: This feature detects short circuits in the output terminals and disconnects the amplifier from the power source to prevent damage to the amplifier and speakers.

Features

1. Work stably within a wide power supply voltage range. ( Vcc = 25 to 60 V )

2. Both positive and negative output offset can be detected through the same pin.

3. Need only single power supply.

4. Power-on delay function

5. Supports automatic reset or latch mode

6. Reduces turn-on and turn-off pop noise

 

Absolute Maximum Ratings (Ta = 25°C)

C1237HA replacement

Integrated Functions

  • Power-on delay timer
  • DC offset detection for left channel
  • DC offset detection for right channel
  • AC power-off detection
  • Relay driver transistor
  • Fault timing control
  • Latch/Auto-reset control

Protection Functions

Function Description
Power-On Delay Delays speaker relay activation until amplifier output stabilizes.
DC Detection Disconnects speakers when excessive DC voltage is detected.
AC Failure Detection Quickly releases the relay when AC mains power is removed to eliminate turn-off pop noise.
Relay Driver Directly drives an external speaker protection relay up to 80mA.
Operating Mode Selectable automatic reset or latching protection via Pin 3.

Typical Applications

  • Stereo audio power amplifiers
  • Hi-Fi amplifiers
  • Integrated amplifiers
  • Home theater receivers
  • Active speaker systems
  • Professional audio amplifiers
  • Audio power modules
  • DIY amplifier protection boards

C1237HA PDF Datasheet