Part Number: CS7054

Function: Low Side PWM FET Controller

Package: DIP 14 Pin Type

Manufacturer: Cherry Semiconductor Corporation

Images:

Description

The CS7054 is a monolithic integrated circuit designed primarily to control the rotor speed of permanent magnet, direct current (DC) brush motors. It drives the gate of an N channel power MOSFET or IGBT with a user-adjustable, fixed frequency, variable duty cycle, pulse width modulated (PWM) signal. The CS7054 can also be used to control other loads such as incandescent bulbs and solenoids. Inductive current from the motor or solenoid is recirculated through an external diode.

The IC is placed in a sleep state by pulling the CTL lead below 0.5V. In this mode everything on the  hip is shut down except for the on-chip regulator and the overall current draw is less than 275 µA.

There are a number of on-chip diagnostics that look for potential failure modes and can disable the external power MOSFET.

Features

1. 200 mA Peak PWM Gate Drive Output

2.  Patented Voltage Compensation Circuit

3. 100% Duty Cycle Capability

4. 5V, ± 3% Linear Reg.

5. Low Current Sleep Mode

6. Overvoltage Protection

7. Over Current Protection of External MOSFET / IGBT

8. Output Inhibit

CS7054 Datasheet