8002 Datasheet PDF – 2.0 Watt Audio Power Amplifier

Part Number: 8002

Function: 2.0 Watt Audio Power Amplifier

Package : SOP 8  Pin Type

Manufacturer: Income Technoloty

Image

8002-audio-power-amplifier

 

Description

The 8002 is a Class-AB audio power amplifier. It is capable of delivering 2.0 watts of continuous average power to an 4Ω BTL load with less than 10% distortion (THD+N) from a 5VDC power supply, or 1.5 watts continuous average power to an 8 Ω BTL load with less than 1% distortion.

The 8002 is designed specifically to provide high quality output power with a minimal amount of external components. It does not require output coupling capacitors or bootstrap capacitors. The 8002 is ideally suited for audio speakers and other low voltage applications.

 

Pinout

8002-datasheet-pinout

Features

1. Improved PSRR at 217 Hz & 1 KHz 60 dB

2. Power output at 5.0V, 10% THD+N, 4 Ohm 2.0 W (typ.)

3. Power output at 5.0V, 1% THD+N, 8Ohm 1.5 W (typ.)

4. 2.2V – 5.5V operation

5. Improved circuitry eliminates pop-click noise during turn-on and turn-off transitions

6. No output coupling capacitors, snubber networks or bootstrap capacitors required

7. Unity-gain stable

8. External gain configuration capability

 

Applications

1. Portable computers

2. Desktop computers

3. Low voltage audio systems

8002 Datasheet PDF


 

Related articles across the web

MC3371 Datasheet PDF – Low Power FM IF – Motorola

Part Number: MC3371, MC3371D, MC3371P, MC3371DTB

Function : Low Power Narrowband FM IF

Package: SO16, TSSOP 16, DIP Type

Manufacturer: Motorola, Freescale, NXP

Image

MC3371 image

Description

The MC3371 and MC3372 perform single conversion FM reception and consist of an oscillator, mixer, limiting IF amplifier, quadrature discriminator, active filter, squelch switch, and meter drive circuitry. These devices are designed for use in FM dual conversion communication equipment. The MC3371/MC3372 are similar to the MC3361/MC3357 FM IFs, except that a signal strength indicator replaces the scan function controlling driver which is in the MC3361/MC3357. The MC3371 is designed for the use of parallel LC components, while the MC3372 is designed for use with either a 455 kHz ceramic discriminator, or parallel LC components.

Absolute maximum ratings :

MC3371 Ordering Information

Features

1. Wide Operating Supply Voltage Range: VCC = 2.0 to 9.0 V

2. Input Limiting Voltage Sensitivity of –3.0 dB

3. Low Drain Current: ICC= 3.2 mA, @ VCC = 4.0 V, Squelch Off

4. Minimal Drain Current Increase When Squelched

5. Signal Strength Indicator: 60 dB Dynamic Range

6. Mixer Operating Frequency Up to 100 MHz

7. Fewer External Parts Required than Earlier Devices

Pinout:

MC3371 datasheet pinout

MC3371 Datasheet