CD1517 PDF Datasheet – 2 X 6 W Stereo Power Amplifier

Part Number: CD1517

Function: 2 X 6 W Stereo Power Amplifier

Package: DIP 16, SIP 9 Pin Type

Manufacturer: Long-Semi, HUAJING

Images:CD1517 datasheet

Description

The CD1517 is an integrated class-B dual output amplifier in a plastic single in-line medium power package with fin and a plastic heat-dissipating dual in-line package.
The device is primarily developed for multi-media applications.

A stereo power amplifier is an electronic device designed to amplify audio signals and drive two separate channels or speakers, typically for creating a stereo sound system. It is a fundamental component in audio systems, such as home stereo setups, home theaters, car audio systems, and professional audio equipment, where high-quality sound reproduction and adequate power output are required.

Features

1. Requires very few external components

2. High output power

3. Fixed gain

4. Good ripple rejection

5. Mute/standby switch

6. AC and DC short-circuit safe to ground and VP

7. Thermally protected

8. Reverse polarity safe

9. Capability to handle high energy on outputs (VP = 0 V)

10. No switch-on/switch-off plop

11. Electrostatic discharge protection.

Block Diagram and Pinouts:

CD1517 pdf pinout

CD1517 PDF Datasheet

Related articles across the web

103H7123 PDF Datasheet – 2-phase Stepping Motor

This post explains for the Stepping Motor.

The Part Number is 103H7123.

The function of this semiconductor is 56mm, 2-phase Stepping Motor.

Manufacturer: Sanyo

Preview images :

103H7123 Stepping Motor

Description

103H7123 is 2-phase Stepping Motor ( Nema 23, 56mm sq. ). A stepper motor, also known as a stepping motor, is an electromechanical device that converts electrical pulses into precise mechanical movement. Unlike traditional motors that rotate continuously when power is applied, a stepper motor moves in discrete steps or increments. This makes them particularly useful in applications that require accurate positioning and control.

Key features of stepper motors include:

1. Step Angle: Stepper motors are characterized by their step angle, which is the angle the motor shaft rotates with each input pulse. Common step angles are 1.8 degrees (200 steps per revolution) and 0.9 degrees (400 steps per revolution). There are also motors with finer step angles for more precise control.

2. Control: Stepper motors are controlled using a sequence of electrical pulses sent to their coils. The number of pulses and their timing determine the motor’s position and speed. The motor moves incrementally in response to each pulse.

Specifications:

1. Single/Dual shaft : Single shaft

2. Output shaft : Circular

3. Holding torque [N∙m] : 0.83

4. Rotor inertia [×10-4kg·m2] : 0.21

5. Rated current [A/phase] : 2

6. Wiring : Unipolar

7. Connection type : Lead wire type

8. Motor mass [kg] : 0.65

9. Operating temperature range : -10 ~ +50℃

10. Operating humidity range : 20 to 90% RH (non-condensing)

Ordering Informations :

103H7121-0140 103H7121-0110 0.39 (55.2) 1 4.8 8 0.1 (0.55) 0.47 (1.04)
103H7121-0440 103H7121-0410 0.39 (55.2) 2 1.25 1.9 0.1 (0.55) 0.47 (1.04)
103H7121-0740 103H7121-0710 0.39 (55.2) 3 0.6 0.8 0.1 (0.55) 0.47 (1.04)
103H7123-0140 103H7123-0110 0.83 (117.5) 1 6.7 15 0.21 (1.15) 0.65 (1.43)
103H7123-0440 103H7123-0410 0.83 (117.5) 2 1.6 3.8 0.21 (1.15) 0.65 (1.43)
103H7123-0740 103H7123-0710 0.78 (110.5) 3 0.77 1.58 0.21 (1.15) 0.65 (1.43)
103H7124-0140 103H7124-0110 0.98 (138.8) 1 7 14.5 0.245 (1.34) 0.8 (1.76)
103H7124-0440 103H7124-0410 0.98 (138.8) 2 1.7 3.1 0.245 (1.34) 0.8 (1.76)
103H7124-0740 103H7124-0710 0.98 (138.8) 3 0.74 1.4 0.245 (1.34) 0.8 (1.76)
103H7126-0140 103H7126-0110 1.27 (179.8) 1 8.6 19 0.36 (1.97) 0.98 (2.16)
103H7126-0440 103H7126-0410 1.27 (179.8) 2 2 4.5 0.36 (1.97) 0.98 (2.16)
103H7126-0740 103H7126-0710 1.27 (179.8) 3 0.9 2.2 0.36 (1.97) 0.98 (2.16)

103H7123 pdf datasheet

Related Posts

103H7123 Datasheet

Related articles across the web