LNBH21PD PDF Datasheet – LNB Supply AND Control IC

Part Number: LNBH21PD

Function: LNB SUPPLY AND CONTROL IC WITH STEP-UP CONVERTER AND I2C INTERFACE

Package: Power SO 20 Pin Type

Manufacturer: STMicroelectronics

Images:

1 page
LNBH21PD pdf datasheet

Description

LNBH21PD is LNB Supply AND Control IC. Intended for analog and digital satellite STB receivers/SatTV, sets/PC cards, the LNBH21 is a monolithic voltage regulator and interface IC, assembled in POWER SO-20, specifically designed to provide the 13/18V power supply and the 22KHz tone signalling to the LNB
downconverter in the antenna or to the multiswitch box.

In this application field, it offers a complete solution with extremely low component count, low power dissipation together with simple design and I2CTM standard interfacing.

Pinouts

LNBH21PD pinout

Features

1. COMPLETE INTERFACE BETWEEN LNB AND I2CTM BUS

2. BUILT-IN DC/DC CONTROLLER FOR SINGLE 12V SUPPLY OPERATION AND HIGH EFFICIENCY (Typ. 94% @ 750mA)

3. TWO SELECTABLE OUTPUT CURRENT LIMIT (450mA / 750mA)

4. BOTH COMPLIANT WITH EUTELSAT AND DIRECT OUTPUT VOLTAGE SPECIFICATION

5. ACCURATE BUILT-IN 22KHz TONE OSCILLATOR SUITS WIDELY ACCEPTED STANDARDS

LNBH21PD PDF Datasheet

Posts related to ‘ Control IC ‘

Part number Description
LNBH21PD LNB Supply AND Control IC
SJ2258 6-Ch, Volume Control IC ( 20 Pin )
ATC9501 SOP 8, Power Supply Control IC – Anachip
TEA1716T Resonant Power Supply Control IC
TM1668 TM1668 PDF – LED Driver Control IC ( Datasheet ) – Titan
BD9270F DC-AC Inverter Control IC
SSC2S110 2S110 PWM control IC – SANKEN
CR5224 15W Power Management Control IC
BD9893F DC-AC Inverter Control IC
IR2520 IR2520 PDF – ADAPTIVE BALLAST CONTROL IC – IR

 

JRC5532D PDF – Low Noise Dual Operational Amplifier

Part Number: JRC5532D

Function: Low Noise Dual Operational Amplifier

Package: DIP8, DMP8, SIP8 Type

Manufacturer: JRC ( New Japan Radio )

Images:

1 page
JRC5532D pdf datasheet

Description

The JRC5532D is a high performance dual low noise operational amplifier. Compared to the standard dual operational amplifiers, such as the NJM1458,it shows better noise performance, improved output drive capability, and considerably higher small-signal and power bandwidths.

This makes the device especially suitable for application in high quality and professional audio equipment, instrumentation, control circuits, and telephone channel amplifiers.

An operational amplifier, often abbreviated as op-amp, is an electronic component that amplifies the difference between two input voltages and produces an output voltage that is much larger than either input. It is widely used in electronic circuits for a variety of applications such as signal amplification, filtering, oscillation, and mathematical operations.

Features

1. Operating Voltage ( ±3V~±20V )

2. Small Signal Bandwidth ( 10MHz typ. )

3. Output Drive Capability ( 600Ω,10Vrms typ. )

4. Input Noise Voltage ( 5nV/√Hz typ. )

5. Power Bandwidth ( 140kHz typ. )

6. Slew Rate ( 8V/µs typ. )

3 page
JRC5532D equivalent

JRC5532D PDF Datasheet

Posts related to ‘ Operational Amplifier ‘

Part number Description
OPA637BP Difet Operational Amplifier
TAA761 TAA761 Operational Amplifier – Datasheet [ PDF ]
UPC844 Quad Operational Amplifier
LM358AP Dual OP AMP
NE5532AP Dual Operational Amplifier
SFC2741 Operational Amplifier, DIP 8
LTC6078 Low Noise Operational Amplifier
OP162 15 MHz, Operational Amplifier
AP358 Dual Operational Amplifier ( PDF )
TL072 JFET-Input Operational Amplifier – TI

 

Related articles across the web