STMicroelectronics Archives - Page 4 of 115

This is one of the types of MOSFETs and is a kind of transistor.

Part Number: P60NF06, STP60NF06

Function : N-Channel, 60V, 0.014Ohm, 60A, Power MOSFET

Package: TO-220, TO-220FP Type

Manufacturer: ST Microelectronics

Image

Description

This Power Mosfet series realized with STMicro electronics unique STripFET process has specifically been designed to minimize input capacitance and gate charge. It is therefore suitable as primary switch in advanced high-efficiency isolated DC-DC converters for Telecom and Computer application. It is also intended for any application with low gate charge drive requirements.

Pinout

Features

1. TYPICAL RDS(on) = 0.014Ω

2. EXCEPTIONAL dv/dt CAPABILITY

3. 100% AVALANCHE TESTED

4. APPLICATION ORIENTED CHARACTERIZATION

Absolute Maximum Ratings (Ta = 25°C)

1. Drain to source voltage: VDSS = 60 V

2. Gate to source voltage: VGSS = ± 20 V

3. Drain current: ID = 60 A

4. Total Dissipation: Pd = 110 W (Tc = 25°C)

5. Channel temperature: Tch = 150 °C

6. Storage temperature: Tstg = -55 to +150 °C

P60NF06 Datasheet

Posts related to ‘ MOSFET ‘

Part number	Description
IRF840	Power MOSFET, TO-220AB – Vishay
K30N60HS	600V, 30A, MOSFET, Transistor
2SK2085	2SK2085 MOSFET – 100V, 1A, Transistor ( Datasheet PDF )
MAX8791	Synchronous MOSFET Driver
2SK1277	2SK1277 MOSFET – 250V, 30A, Transistor ( Datasheet PDF )
4N60B	600V, 4A, N-Ch, Power MOSFET
CSD17483F4	30V, N-Ch, MOSFET, Transistor
ZXMN3A02N8	30V, 9A, N-Ch, MOSFET
K3566	N-Ch, 900V, 2.5A, MOSFET – 2SK3566
K11A60D	K11A60D PDF – 600V, MOSFET, Transistor (TK11A60D)

Description

This is the basic LD33CV, LD1117V33 voltage regulator, a low drop positive regulator with a 3.3V fixed output voltage. This fixed regulator provides a great amount of stability and protection for your project and with its on ship trimming this regulator is able to reach an output voltage tolerance within ±1%. Each one of these voltage regulators can output a max current of 800mA. High efficiency is assured by NPN pass transistor. In fact in this case, unlike than PNP one, the Quiescent Current flows mostly into the load. Only a very common 10μF minimum capacitor is needed for stability.

Pinout:

LD33CV Datasheet PDF