LA4440 PDF Datasheet – 2-Channel, Power Amplifier

Part Number: LA4440, LA4440J-K-E

Function: 6W, 2-Channel, Bridge 19W Power Amplifier

Package: SIP14H

Manufacturer: ON Semiconductor

Images:

LA4440 Power Amplifier

Description

The LA4440 is 2-Channel, Power Amplifier. An audio power amplifier is an electronic amplifier that amplifies low-power audio signals (signals from a microphone, instrument, or other audio source) to a level suitable for driving loudspeakers or headphones. The main purpose of an audio power amplifier is to increase the power of an audio signal, so that it can be used to drive a loudspeaker and produce sound at a higher volume.

LA4440 pdf datasheet

Features

1. Built-in 2 channels (dual) enabling use in stereo and bridge amplifier applications.

(1) Dual : 6W x 2 (typ)

(2) Bridge : 19W (typ)

2. Minimum number of external parts required.

3. Small pop noise at the time of power supply ON/OFF and good starting balance.

4. Good ripple rejection : 46dB (typ)

5. Good channel separation.

6. Small residual noise (Rg=0).

7. Low distortion over a wide range from low frequencies to high frequencies.

8. Easy to design radiator fin.

9. Built-in audio muting function.

10. Built-in protectors.

a. Thermal protector

b. Overvoltage, surge voltage protector

c. Pin-to-pin short protector

LA4440 PDF Datasheet

Posts related to ‘ Power Amplifier ‘

Part number Description
8002 2.0 Watt Audio Power Amplifier
UPC2581V Power Amplifier, UPC2581 – NEC
LM3886 68W Audio Power Amplifier – National
STK8050 Power Amplifier
TPA6205A1 TPA6205A1 Datasheet – Audio Power Amplifier ( PDF )
XPT9910 Power Amplifier, 16 Pin – XPT
TA8268AH Audio Power Amplifier – Toshiba
TAS5705 20W Stereo I2S Audio Power Amplifier
TDA1558 TDA1558 PDF – Car Radio Power Amplifier
STK4278L 3 Ch, Audio Power Amplifier – Sanyo

 

ATR4251 PDF Datasheet – Antenna Amplifier IC

An impedance matching circuit for an AM/FM antenna is designed to ensure that the antenna’s impedance matches the input impedance of the receiver or the input stage of the radio. This helps maximize the transfer of power from the antenna to the receiver, improving signal reception and reducing signal loss. Impedance matching is particularly important in radio frequency (RF) circuits to minimize signal reflections and optimize signal strength.

Part Number: ATR4251

Function: High-dynamic-range Antenna Amplifier IC

Package: SSOP 20 Pin Type

Manufacturer: ATMEL Corporation

Images:

1 page
ATR4251 pdf datasheet

Description

The ATR4251 is an integrated AM/FM antenna impedance matching circuit. It compensates
cable losses between the antenna (for example windshield, roof, or bumper antennas) and the
car radio which is usually placed far away from the antenna.

AM refers to the long wave (LW), medium wave (MW) and short wave (SW) frequency bands
(150 kHz to 30 MHz) that are usually used for AM transmission, and FM means any of the frequency bands used world-wide for FM radio broadcast (70 MHz to 110 MHz).

 

Features

1. High Dynamic Range for AM and FM

2. Integrated AGC for AM and FM

3. High Intercept Point 3rd Order for FM

4. FM Amplifier Adjustable to Various Cable Impedances

5. High Intercept Point 2nd and 3rd Order for AM

6. Low Noise Output Voltage

7. Low Power Consumption

8. Low Output Impedance AM

 

2 page
ATR4251 pinout

AM Amplifier

Due to the long wavelength in AM bands, the antennas used for AM reception in automotive
applications must be short compared to the wavelength. Therefore these antennas do not provide 50Ω output impedance, but have an output impedance of some pF. If these (passive)
antennas are connected to the car radio by a long cable, the capacitive load of this cable (some
100 pF) dramatically reduces the signal level at the tuner input.

 

ATR4251 PDF Datasheet

Posts related to ‘ Amplifier IC ‘

Part number Description
AN17830A AN17830A PDF – Dual/Bridge Audio Power Amplifier IC
RSN3502A Audio Power Amplifier IC ( Pinout )
STK411-240E Audio Power Amplifier IC – Sanyo
TC8002D 3W, Audio Amplifier IC – Fuman
TB2924AFG 20W x 2ch Power Amplifier IC – Toshiba
SE115 150V, 20mA, Error Amplifier IC – Sankan
SE105N Error Amplifier IC
SE110N 110V, 20mA, Error Amplifier IC