Winbond 25Q32FVSIG Datasheet – 32M-bit Serial Flash Memory

Part Number: W25Q32FVSSIG, Marking : 25Q32FVSIG

Function: 32M-bit Serial Flash Memory

Package: SOIC-8 208-mil Type

Manufacturer: Winbond Electronics Corporation

Image

Winbond 25Q32FVSIG Datasheet

Description

The Winbond 25Q32FVSIG (32M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power. The 25Q series offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The device operates on a single 2.7V to 3.6V power supply with current consumption as low as 4mA active and 1μA for power-down. All devices are offered in space-saving packages.

Pinout
25Q32FVSIG Pinout

Features

Highest Performance Serial Flash

1. 104MHz Single, Dual/Quad SPI clocks
2. 208/416MHz equivalent Dual/Quad SPI
3. 50MB/S continuous data transfer rate
4. More than 100,000 erase/program

Advanced Security Features

1. Software and Hardware Write-Protect
2. Power Supply Lock-Down and OTP protection
3. Top/Bottom, Complement array protection
4. Individual Block/Sector array protection
5. 64-Bit Unique ID for each device
6. Discoverable Parameters (SFDP) Register
7. 3X256-Bytes Security Registers with OTP locks
8. Volatile & Non-volatile Status Register Bits

 

Winbond 25Q32FVSIG Datasheet


Other data sheets are available within the file: W25Q32FVSSIP, 25Q32FVSIP

Related articles across the web

AM28F020A Datasheet PDF – 2 Megabit Flash Memory – AMD

Part Number: AM28F020A

Function: 2 Megabit (256 K x 8-Bit) CMOS 12.0 Volt, Bulk Erase Flash Memory

Package: DIP, PLCC, TSOP 32 Pin Type

Manufacturer: Advanced Micro Devices

Image

AM28F020A Flash Memory

Description

The Am28F020A is a 2 Megabit Flash memory organized as 256 Kbytes of 8 bits each. AMD’s Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory. The Am28F020A is packaged in 32-pin PDIP, PLCC, and TSOP versions. It is designed to be reprogrammed and erased in-system or in standard EPROM programmers. The Am28F020A is erased when shipped from the factory. The standard Am28F020A offers access times of as fast as 70 ns, allowing high speed microprocessors to operate without wait states. To eliminate bus conten tion, the device has separate chip enable (CE#) and output enable (OE#) controls.

Pinouts:

AM28F020A datasheet

Features

1. High performance
(1) Access times as fast as 70 ns

2. CMOS low power consumption
(1) 30 mA maximum active current
(2) 100 μA maximum standby current
(3) No data retention power consumption

3. Latch-up protected to 100 mA from
(1) 1 V to VCC +1 V

4. Embedded Erase Electrical Bulk Chip Erase
(1) Five seconds typical chip erase, including pre-programming

5. Embedded Program
(1) 14 μs typical byte program, including time-out
(2) 4 seconds typical chip program

6. Command register architecture for microprocessor/microcontroller compatible write interface

Other data sheets are available within the file: AM28F020, AM28F020A-120EC, AM28F020A-120ECB,

AM28F020A-120EE, AM28F020A-120EEB

AM28F020A Datasheet PDF Download


AM28F020A pdf

Posts related to ‘ Flash Memory ‘

Part number Description
25LV512 512 Kbit, Serial Flash Memory
M28F101 1Mb (128Kx8, Chip Erase) Flash Memory
AM29F400AT 4 Megabit Erase Flash Memory
25U6435F 64M-Bit Flash Memory – MXIC
TE28F008B3BA110 8-Mbit Flash Memory
W25Q40BV 4M-Bit Serial Flash Memory – Winbond
K9F2G08U0B 256M x 8 Bit NAND Flash Memory
25Q16 16M-Bit Serial Flash Memory – Winbond
K9GAG08U0E 16Gb NAND Flash Memory – Samsung

 

Related articles across the web