DF6113 Datasheet – SOP 8Pin, LED Backlight Driver – HJH

Part Number: DF6113

Function: LED Backlight Driver

Package: SOP 8 Type

Manufacturer: HJH ( http://www.haojiahaokj.com )

Image:

DF6113 led driver

Description

The DF6113 is a simple LED controller IC that boosts a 5-24V DC input ot produce a precision, current-regulated output. The DF6113 is escpecially suited to LCD backlight applications. Linear dimming modes allow stable adjustment of total output current from 10% ~ 100%. The IC includes output short-circuit and over-voltage protection.

Pinout:

DF6113 datasheet pinout

Features

1. DC input voltage range 5 – 24V

2. Single configurable current-regulated output

3. 10% ~ 100% output current adjustment

4. Positive or inverted analog dimming control

5. Built-in power management and soft-start

6. Output short-circuit and over-voltage protection

 

DF6113 Datasheet

 

Related articles across the web

AM28F020A Datasheet PDF – 2 Megabit Flash Memory – AMD

Part Number: AM28F020A

Function: 2 Megabit (256 K x 8-Bit) CMOS 12.0 Volt, Bulk Erase Flash Memory

Package: DIP, PLCC, TSOP 32 Pin Type

Manufacturer: Advanced Micro Devices

Image

AM28F020A Flash Memory

Description

The Am28F020A is a 2 Megabit Flash memory organized as 256 Kbytes of 8 bits each. AMD’s Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory. The Am28F020A is packaged in 32-pin PDIP, PLCC, and TSOP versions. It is designed to be reprogrammed and erased in-system or in standard EPROM programmers. The Am28F020A is erased when shipped from the factory. The standard Am28F020A offers access times of as fast as 70 ns, allowing high speed microprocessors to operate without wait states. To eliminate bus conten tion, the device has separate chip enable (CE#) and output enable (OE#) controls.

Pinouts:

AM28F020A datasheet

Features

1. High performance
(1) Access times as fast as 70 ns

2. CMOS low power consumption
(1) 30 mA maximum active current
(2) 100 μA maximum standby current
(3) No data retention power consumption

3. Latch-up protected to 100 mA from
(1) 1 V to VCC +1 V

4. Embedded Erase Electrical Bulk Chip Erase
(1) Five seconds typical chip erase, including pre-programming

5. Embedded Program
(1) 14 μs typical byte program, including time-out
(2) 4 seconds typical chip program

6. Command register architecture for microprocessor/microcontroller compatible write interface

Other data sheets are available within the file: AM28F020, AM28F020A-120EC, AM28F020A-120ECB,

AM28F020A-120EE, AM28F020A-120EEB

AM28F020A Datasheet PDF Download


AM28F020A pdf

Posts related to ‘ Flash Memory

Part number Description
25LV512 512 Kbit, Serial Flash Memory
M28F101 1Mb (128Kx8, Chip Erase) Flash Memory
AM29F400AT 4 Megabit Erase Flash Memory
25U6435F 64M-Bit Flash Memory – MXIC
TE28F008B3BA110 8-Mbit Flash Memory
W25Q40BV 4M-Bit Serial Flash Memory – Winbond
K9F2G08U0B 256M x 8 Bit NAND Flash Memory
25Q16 16M-Bit Serial Flash Memory – Winbond
K9GAG08U0E 16Gb NAND Flash Memory – Samsung

 

Related articles across the web