25Q32FV PDF – 32M-Bit, Flash Memory – W25Q32FV

Serial Flash Memory is a type of non-volatile memory that stores digital information in a series of memory cells, typically organized in an array of rows and columns. Unlike RAM (Random Access Memory), which loses its data when power is removed, flash memory retains data even when power is turned off. Serial flash memory is characterized by its serial interface, meaning data is accessed and written one bit at a time through a single data line, as opposed to parallel flash memory that transfers multiple bits simultaneously through multiple lines.

Part Number: 25Q32FV, W25Q32FV

Function: 32M-Bit, Serial Flash Memory

Package: SOIC, WSON 8 Pin, SOIC 16 Pin Type

Manufacturer: Winbond

Images:25Q32FV datasheet memory

Description

The 25Q32FV (32M-bit) Serial Flash memory provides a storage solution for systems with limited
space, pins and power. The 25Q series offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The device operates on a single 2.7V to 3.6V power supply with current consumption as low as 4mA active and 1µA for power-down. All devices are offered in space-saving packages.

A Hold pin, Write Protect pin and programmable write protection, with top or bottom array control, provide further control flexibility. Additionally, the device supports JEDEC standard manufacturer and device ID and SFDP Register, a 64-bit Unique Serial Number and three 256-bytes Security Registers.

[…]

25Q32FV pinout winbond

Features:

1. Highest Performance Serial Flash

– 104MHz Single, Dual/Quad SPI clocks

– 208/416MHz equivalent Dual/Quad SPI

– 50MB/S continuous data transfer rate

– More than 100,000 erase/program cycles

– More than 20-year data retention

2. Efficient “Continuous Read” and QPI Mode

– Continuous Read with 8/16/32/64-Byte Wrap

– As few as 8 clocks to address memory

– Quad Peripheral Interface (QPI) reduces instruction overhead

– Allows true XIP (execute in place) operation

– Outperforms X16 Parallel Flash

25Q32FV PDF Datasheet

Pm25LD512 PDF – 512Kbit (64K x 8 ) Serial Flash Memory

This post explains for the Serial Flash Memory.

Serial Flash Memory is a type of non-volatile memory that stores data using a serial interface instead of a parallel interface. It is also commonly referred to as Serial NOR Flash. Unlike parallel flash memory, which transfers data in parallel over multiple data lines, serial flash transfers data serially, bit by bit, over a single data line.

Serial flash memory is commonly used in a wide range of applications, including consumer electronics, automotive systems, and industrial and medical devices, due to its compact size, low power consumption, and fast read and write speeds. Some popular serial flash memory products include the Serial Peripheral Interface (SPI) NOR Flash and the Three-wire Serial NOR Flash.

The Part Number is Pm25LD512.

The function of this semiconductor is 512Kbit, Serial Flash Memory.

The package is SOIC 8 pin Type

Manufacturer: Chingis Technology

Preview images :

Pm25LD512 pdf memory

Description

The Pm25LD512, Pm25LD010, Pm25LD020 are 512Kbit/ 1Mbit / 2Mbit Serial Peripheral Interface (SPI) Flash memories, providing single- or dual-output. The devices are designed to support a 33 MHz clock rate in normal read mode, and 100 MHz in fast read, the fastest in the industry. The devices use a single low voltage power supply, wide operating  voltage ranging from 2.3 Volt to 3.6 Volt, to perform read, erase and program operations. The devices can be programmed in standard EPROM programmers.

The devices are accessed through a 4-wire SPI Interface consisting of Serial Data Input/Output (SlO), Serial Data Output (SO), Serial Clock (SCK), and Chip Enable (CE#) pins. They comply with all recognized command codes and operations. The dual-output fast read operation provides and effective serial data rate of 200MHz. […]

2 page

Pm25LD512 datasheet pinout

Features:

• Low Power Consumption
– Typical 10 mA active read current
– Typical 15 mA program/erase current

• Hardware Write Protection
– Protect and unprotect the device from write operation by Write Protect (WP#) Pin

• Software Write Protection
– The Block Protect (BP2, BP1, BP0) bits allow partial or entire memory to be configured as readonly

Featured Posts

Pm25LD512 PDF Datasheet

Related articles across the web