C1815 Datasheet – 50V, 150mA, NPN Transistor, 2SC1815

This is a kind of NPN Transistor. It is is a type of bipolar junction transistor (BJT) that consists of two n-type semiconductor materials separated by a single p-type material.

Part Number: C1815, 2SC1815

Function: 50V, 150mA, NPN Transistor

Package: TO-92 Type

Manufacturer: Toshiba Semiconductor

Image
C1815 image

Description

This is 50V, 150mA, Silicon NPN Epitaxail Type Transistor. C1815 transistor is a type of bipolar junction transistor (BJT) made from silicon, a semiconductor material. This transistor is designed for amplifying or switching electronic signals in various electronic circuits.

:

 

Features

1.  High voltage and high current: VCEO= 50 V (min), IC= 150 mA (max)

2.  Excellent hFElinearity :

(1) hFE (2)= 100 (typ.)  at VCE= 6 V, IC= 150 mA

(2) hFE(IC= 0.1 mA)/hFE(IC= 2 mA)  = 0.95 (typ.)

3.  Low noise: NF = 1dB (typ.) at f = 1 kHz

4.  Complementary to 2SA1015 (O, Y, GR class)

Pinout

C1815 Datasheet

Absolute maximum ratings ( Ta=25°C )

1. Collector to Base Voltage: Vcbo = 60 V

2. Collector to Emitter Voltage: Vceo = 50 V

3. Emitter to Base Voltage: Vebo = 5 V

4. Collector Current: Ic = 150 mA

5. Total Dissipation : Pc = 400 mW

6. Junction Temperature: Tj = 125°C

7. Storage Temperature: Tsg = -55 ~ +150°C

 

Applications

1. Audio Frequency General Purpose Amplifier

2. Driver Stage Amplifier

C1815 Datasheet


 

Posts related to ‘ NPN Transistor ‘

Part number Description
2N3441 140V, 3A, NPN Transistor – Microsemi
J6810D 1500V, NPN Transistor – FJAF6810D
3DD4202BD 400V, NPN Transistor – JILIN SINO
2N356 NPN Transistor, 18V, 0.5A, TO-5
2SC4367 Vceo=20V, 100mA, NPN Transistor
C3228 KTC3228, NPN Transistor – KEC
BC847BS 45V, 100mA, NPN/NPN Transistor
TIP100 60V, 8A, Darlington NPN Transistor
SD1127 18V, 0.64A, RF NPN Transistor
D2394 60V, 3A, NPN Transistor, 2SD2394

 

HC-SR501 PDF – PIR Sensor, Motion Detector ( Manual )

A PIR (Passive Infrared) sensor is an electronic device that detects motion by measuring changes in the infrared (heat) radiation emitted by objects within its field of view. PIR sensors are commonly used in various applications, including security systems, automatic lighting controls, occupancy detection in buildings, and even in some consumer electronics.

Part Number: HC-SR501

Function: PIR Sensor, Motion Detector

Demension : 32 x 24 mm

Package: Module type

Manufacturer: ETC

Images:HC-SR501 pdf manual

Description

The HC-SR501 is based on infrared technology, automatic control module, using Germany imported LHI778 probe design, high sensitivity, high reliability, ultra-low-voltage operating mode, widely used in various auto-sensing eletrical equipment, especially for battery-powered automatic controlled products.

Passive Infra-Red (PIR) sensors are used to detect motion based on the infrared heat in the surrounding area. This makes them a popular choice when building a system to detect potential intruders or people in general. These sensors can take for 10-60 seconds to warm up, so try to avoid motion during that time.

Specifications:

1. Voltage : 5 V ~ 20 V

2. Power Consumption : 65 mA

3. TTL output : 3.3V, 0V

4. Lock time : 0.2 sec

5. Sensing range : less than 120 degree, whtin 7 meters

Features:

1. Automatic induction : to enter the sensing range of the output is high, the person leaves the sensing range of the automatic delay off high output low.

2. Photosensitive control ( optional, not factory-set ) can be set photosensitive contorl, day or light intensity without induction.

Applications:

1. Automatically sensing light for floor, bathroom, basement, porch, warehouse.

 

HC-SR501 PDF Datasheet

HC-SR501 pdf