The SMIH-12VDC-S-L-C is 12VDC relay. A 12V, 1 form C relay refers to a specific type of relay with a 12-volt operating voltage and 1 form C (also known as 1C or SPDT – Single Pole Double Throw) configuration.
The relay contact form is 1 form C type.
The manufacturer of the product is NingBo Songle.
See the preview image and the PDF file for more information.
Preview images :
Description
This is 12V, 1 form C type, Songle Relay.
12V: This indicates the operating voltage of the relay. In this case, the relay is designed to operate with a voltage of 12 volts DC (Direct Current). The relay coil is energized with this voltage to activate the switching action.
1 form C: The term “1 form C” refers to the contact configuration of the relay. It means that the relay has a single set of common (C) contacts and can switch between two separate positions. In the normal state, the common contact is connected to one of the other two contacts (usually referred to as normally open (NO) and normally closed (NC)). When the relay is energized, the common contact switches from one position to the other.
Relays are electromechanical devices that use an electromagnetic coil to control the switching of contacts. They are commonly used in various applications, such as control systems, automation, automotive electronics, and power distribution. The 1 form C configuration is particularly useful when you need a single relay to switch between two different circuits or states.
1. SPST through DPDT contact arrangements.
2. 5KV dielectric,coil to contact.
3. Standard type and plastic sealed type available.
4. High sensitivity type for low coil consumption is available.
5. For electrical device in control system,e.g heating controllers. servo motors,solenoid valves,lifting magnets etc.
PERFORMANCE[at initial value:
Contact Rsistance : 100 mhom Max
Operate time : 15 msec. Max
Release time : 10 msec. Max
Dielectric Strength
Between coil & contact
Between contacts
5000VAC 50/60Hz(1min)
1000VAC 50/60Hz(1min)
Insulaton Resistance 100M ohm Min(500VDC)
Max. ON/OFF Switching
Mechanically
Electrically
300 ops/min
30 ops/min
Operating Ambient temp -30 to 70degrees
Operating Humidity 45 to 85% RH
Vibration
Damage Limits
Operating Extremes
10 to 55Hz Double Amp.1.5mm
10 to 55Hz Double Amp.1.5.mm
[…]
Related Posts
SMIH-12VDC-S-L-C PDF Datasheet
