Part Number: BFW10
Function: VHF/UHF Amplifier(N-Channel/ Depletion)
Package: TO-72 ( TO-206A ) type
Manufacturer: Motorola Inc
Images:
Description
The BFW10 is N-Channel JFET.
A JFET (Junction Field-Effect Transistor) can be used as an amplifier in VHF (Very High Frequency) and UHF (Ultra High Frequency) applications. JFETs are often preferred in these frequency ranges due to their high input impedance, low noise characteristics, and good high-frequency response.
JFET amplifiers are commonly used in VHF/UHF circuits such as radio receivers, television tuners, communication systems, and RF (Radio Frequency) front-end stages. They can provide gain and amplification for signals in the VHF/UHF frequency range, typically spanning from 30 MHz to several GHz.
One common configuration for a JFET amplifier in VHF/UHF applications is the common-source configuration. In this setup, the JFET is connected with its source terminal grounded, the input signal is applied to the gate terminal, and the amplified output is taken from the drain terminal. By biasing the JFET appropriately, it can operate in its active region to amplify the input signal.
Maximum Ratings:
1. Drain-source Voltage : Vdss = 30 Vdc
2. Drain-Gate Voltage : Vdg = 30 Vdc
3. Reverse Gate-Souce Voltage : Vgsr = 30 Vdc
4. Forward Gate Current : Igf = 10 mAdc
[…]
BFW10 Datasheet
