AC1501 PDF Datasheet – PWM Buck DC/DC Converter

This post explains for the DC/DC Converter. A PWM (Pulse-Width Modulation) buck DC/DC converter, often referred to simply as a “buck converter,” is a type of power converter or voltage regulator used in electronics to step down voltage levels efficiently.

The Part Number is AC1501.

The Package is TO-220-5L Type.

The function of this semiconductor is PWM Buck DC/DC Converter.

Manufacturer: Anachip Corp.

Preview images :

1 page
AC1501 pdf pinout

Description

The AP1501 series are monolithic IC that design for a step-down DC/DC converter, and own the ability of driving a 3A load without additional transistor component. Due to reducing the number of external component, the board space can be saved easily.
The external shutdown function can be controlled by logic level and then come into standby mode.

The internal compensation makes feedback control have good line and load regulation without external design. Regarding protected function, thermal shutdown is to prevent over temperature operating from damage, and current limit is against over current operating of the output switch.

1. Voltage Regulation: Buck converters provide a stable and regulated output voltage even when the input voltage varies. This is essential for ensuring consistent power to sensitive electronic components.

2. PWM Control: Pulse-width modulation control allows for precise and flexible regulation of the output voltage. It can be adjusted to meet specific voltage requirements.

 

Features

1. 150Khz +15% fixed switching frequency

2. Voltage mode non-synchronous PWM control

3. Thermal-shutdown and current-limit protection

4. ON/OFF shutdown control input

5. Operating voltage can be up to 40V

6. Output load current: 3A

Block Diagram

AC1501 datasheet

Applications

1. Simple High-efficiency step-down regulator

2. On-card switching regulators

3. Positive to negative converter

 

AC1501 PDF Datasheet

IRFZ44N Datasheet – 55V, Power MOSFET – IR ( PDF )

This post explains for the MOSFET.

Metal Oxide Semiconductor Field Effect Transistor is a type of field effect transistor (FET) that uses an N-type semiconductor material as the conducting channel to control the flow of current.

Part Number: IRFZ44N

Functions: HEXFET Power MOSFET ( Vdss = 55V, Rds(on) = 17.5m Ohm, Id = 49A )

Package: TO-220AB

Manufacturer: International Rectifier

Image

IRFZ44N image

Description

Advanced HEXFET Power MOSFETs from International Rectifier utilize advanced processing techniques to achieve extremely low on-resistance per silicon area. This benefit, combined with the fast switching speed and ruggedized device design that HEXFET power MOSFETs are well known for, provides the designer with an extremely efficient and reliable device for use in a wide variety of applications. The TO-220 package is universally preferred for all commercial-industrial applications at power dissipation levels to approximately 50 watts. The low thermal resistance and low package cost of the TO-220 contribute to its wide acceptance throughout the industry.

 

IRFZ44N Pinout

IRFZ44N pinout

 

Features

1. Advanced Process Technology

2. Ultra Low On-Resistance

3. Dynamic dv/dt Rating

4. 175°C Operating Temperature

5. Fast Switching

6. Fully Avalanche Rated

 

Electrical Characteristics

IRFZ44N datasheet

IRFZ44N Datasheet


 

Posts related to ‘ HEXFET MOSFET ‘

Part number Description
IRF520 100V, 9.2A, HEXFET MOSFET
IRL2203N Vdss=30V, HEXFET MOSFET
IRFHE4250DPBF 25V, HEXFET MOSFET
IRFP260N IRFP260N Transistor – 200V, 50A, HEXFET MOSFET
LR2905 55V, 42A, HEXFET MOSFET ( PDF )
IRFP254N 250V, 23A, HEXFET MOSFET
IRL540N 100V, 36A, HEXFET MOSFET
IRFP260N 200V, 50A, HEXFET MOSFET ( PDF )
IRF640 200V, 9A, HEXFET MOSFET
IRFP2907 75V, 209A, HEXFET MOSFET – IR

 

Related articles across the web